AZRUEN
Friendly Asked Questions

Combustion chamber (furnace), stoves and fireplaces and rules of care.

1.what are the basic rules of use?

There are different points in the rules for the use of wood and gas fireplaces care. The points to be paid attention to in the wood fireplaces, they should ignite, but we must use less wood in its capacity to not later add more firewood. Closed combustion chambers are not suitable for opening after ignition in fireplaces. Only the first thrown firewood should be added to the extinguish. Only when the first thrown firewood starts to extinguish, in this case it is possible to add new. Special tools should be used to prevent capture. It is enough to throw these funds into the combustion chamber, so that the process of flame purification begins.

When using gas fireplaces, be sure to comply with the safety regulations of the gas system and other common gas equipment and observe safety regulations.

 

2. What is the advantage of traditional brick fireplaces?
Combustion chambers (furnace) can be made of cast iron or steel material. Advantages-durability, closed glass, preliminary solution of problems which can arise in standard traditional fireplaces from bricks, and also concentration of technological innovations.

 

3.how to clean the glass in the fireplace?

Combustion chambers (furnace) can be made of cast iron or steel material. Advantages-durability, closed glass, preliminary solution of problems which can arise in standard traditional fireplaces from bricks, and also concentration of technological innovations.

In gas fireplaces It is possible to use daily means for a windshield wiper. And in wood fireplaces it is necessary to use special means. These funds are the products of the fireplace manufacturers. You can get it from the official representatives.

 

4. What is the cause of the unpleasant odor caused after the first use of the fireplace?

Combustion chambers (furnace) can be made of cast iron or steel material. Advantages-durability, closed glass, preliminary solution of problems which can arise in standard traditional fireplaces from bricks, and also concentration of technological innovations.

The smell, which occurs at the first burning, arises mainly after warm contact of metal materials with new materials used during installation. After the installation of the fireplace, it is recommended to kindle the fireplace several times (for control) for a certain period of time. The smell will decrease with time and will be completely reduced.


5. What type of wood is used in fireplaces?
Combustion chambers (furnace) can be made of cast iron or steel material. Advantages-durability, closed glass, preliminary solution of problems which can arise in standard traditional fireplaces from bricks, and also concentration of technological innovations.

First of all it is necessary to consider that firewood should be dry. Wood tree, oak and fruit trees, such trees can provide long-term fire resistance. The aroma of fruit trees is pleasant to smell. It is impractical to use wood firewood with a lot of resin, like pine and peanut wood. Today there are special pallets and briquettes for fireplaces and furnaces. (Compressed firewood) They provide long-lasting combustion and then a maximum lower thickness.

 

6. What is chimney?

Chimney-the most basic part of the fireplace or oven. Incorrect calculation is the main and № 1 source of problems that may occur if improper pipes are installed incorrectly.

 

7. What types of chimneys are there?

Chimney-the most basic part of the fireplace or oven. Incorrect calculation is the main and № 1 source of problems that may occur if improper pipes are installed incorrectly.

The general provisions of the pipe covered with ceramic tube, insulation, with a lid for cleaning, consisting of concrete or BIMSA, are durable and correspond to the purpose. Manufacturing companies have a warranty above 30 years.               

Stainless steel pipes. (Products of individual producers of chimneys).

Stainless steel double, insulated pipes (ProdTraditional brick pipes?

 

8. Chimney-the most basic part of the fireplace or oven.

Incorrect calculation is the main and № 1 source of problems that may occur if improper pipes are installed incorrectly.

General provisions. The transition to these pipes should be submitted through special pipes, they should be transferred by means of disks. In a square shape, problems are sometimes created in the air flow.  And also it is necessary to establish correctly calculation of a chimney door (diameter).ucts of selected producers of chimneys).

 

9. Is the gas system dangerous?

Chimney-the most basic part of the fireplace or oven. Incorrect calculation is the main and № 1 source of problems that may occur if improper pipes are installed incorrectly.

Gaseous products must be added to the fireplaces and installed by a professional. Smart gas systems are safe. If there are any problems, it will automatically stop, and if you want to bring it into working state, it won't work. Please contact your official partners.

Template variable fdk_products does not exists or parameter fromJson empty.

AZ1025, Najafgulu Rafiev str., 14. Baku, Azerbaijan.

info@fdk.az

+994 50 272 12 20 | +994 55 334 84 35

Get in touch